Paint Calculator for Walls and Ceilings
Work out how many litres and how many cans of paint a room needs: walls minus doors and windows, the ceiling if you want it, the number of coats and the coverage printed on your tin. Primer is optional. It's an estimate for interior walls and ceilings of a rectangular room. Trim, doors, floors and façades are out of scope.
Room dimensions
Openings & coats
Paint and ceiling
Take it from your tin: square metres covered by 1 litre in one coat.
Primer
Tick to add one coat of primer over the same area.
One wall is drawn to scale with a door and a window cut out. The can fills up to 20 L and then stays full, so a bigger amount still looks full. The ceiling is not drawn: its litres are in the results.
Before you buy
- Use the coverage figure from your tin, not a generic one. Real products differ a lot: one manufacturer's matt wall paint covers 10–14 m² per litre on smooth, non-absorbent walls but only 7–9 m² on rough, absorbent ones. Another paint is rated at about 8 m², and some vinyl matts claim up to 17 m². If the tin gives a range, take the lower end for bare plaster, concrete, unprimed plasterboard or textured wallpaper, and the upper end for smooth, primed or previously painted walls.
- The 10% reserve is for touch-ups and roller losses. Some guides add 15%. If you're tinting a custom colour, buy everything from one batch at once, because a can mixed later may not match exactly.
- Painting the ceiling with a different (often flatter) ceiling paint? The ceiling litres are shown on their own line, so you can buy that paint separately. Ceilings are painted overhead, and in practice they often take a little more paint than the label suggests.
- Very absorbent bases (aerated concrete, fresh plaster) may need two coats of primer. This calculator counts one, so double the primer figure in that case. The manufacturer's data sheet always overrides this estimate.
How this is calculated
The calculator multiplies the room's perimeter by the wall height to get the wall area, 2 × (length + width) × height. Next it subtracts the doors and windows. By default it uses a standard allowance of about 1.6 m² per door and 1.5 m² per window. Switch to "my own area" if your openings are larger or smaller: add up width × height of each one and enter the total. Russian state estimating norms for water-based and acrylic paints also count only the surface that is actually painted, with openings measured to the outside of the frame. If you tick the ceiling, its area (length × width) is added. The total area is multiplied by the number of coats and divided by the coverage per coat in square metres per litre, the same "area ÷ coverage × coats" rule that Dulux publishes. A 10% reserve for touch-ups is added on top. The result is divided by the size of one can and rounded up, because cans are sold whole, and the calculator shows how much will be left over after the last coat. Primer, if you include it, is one coat over the same area at its own coverage (deep-penetrating primers typically use 0.1–0.2 litres per m²), rounded up to whole containers. The calculator has no hidden surface coefficients. The type of wall only matters through the coverage figure you enter, because manufacturers publish coverage per surface condition (smooth or rough), not universal multipliers.
Common questions
How many coats of paint do I need?
Two is the standard. Dulux's trade guidance calls two full coats the normal finishing process, and Dulux's calculator assumes two. One coat can be enough when you repaint a similar colour over sound paint, or with high-opacity paints sold as one-coat. A big colour change (dark to light) or fresh, unprimed walls may need three.
Do I need to prime the walls first?
Usually on new plaster, bare plasterboard, patched areas and very absorbent surfaces. Primer evens out absorption, so the paint covers its rated area instead of soaking in. On sound, previously painted walls primer is usually unnecessary. Tick "Add primer" to add one coat at its own coverage. Deep-penetrating primers typically use 0.1–0.2 L per m².
How much paint do I need for a ceiling?
Ceiling area is simply length × width, so a 4 × 3 m room has a 12 m² ceiling: about 2.4 L for two coats at 10 m² per litre, before the reserve. Tick "Paint the ceiling" and the calculator adds it, showing the ceiling litres on their own line.
How much paint does paintable wallpaper take?
More than a smooth wall, because the texture increases the real surface. For example, one paint sold for woodchip wallpaper is rated at 130–150 ml per m² (about 6.7–7.7 m² per litre) per coat. Use the lower end of your tin's range, or do a test patch first, as manufacturers recommend. To work out the wallpaper itself, use the Wallpaper Calculator.
Why don't you have a "drywall" or "concrete" surface option?
Because we couldn't find reliable published multipliers for it. Paint makers give coverage for smooth and for rough or absorbent surfaces, not per material, and once a surface is properly prepared and primed, Russian estimating norms use the same paint quantity for plaster and for plasterboard. So the surface is taken into account through the coverage figure you enter. If you're putting up new plasterboard first, the Drywall Calculator counts the sheets.
Should I subtract doors and windows?
Yes, for a closer estimate. The standard allowance is about 1.6 m² per door and 1.5 m² per window. Oversized openings such as patio doors or bay windows need the "my own area" option. Some decorators skip small openings and treat them as extra reserve. If you do that, you'll just have a little more paint left.
Typical coverage by paint type
Figures from manufacturers' data sheets for specific products, per coat. Use them as a sanity check, not instead of your tin.
| Paint type | Coverage per coat, m²/L | Source |
|---|---|---|
| Matt interior wall & ceiling paint, smooth non-absorbent surface | 10–14 | Tikkurila data sheets (Prof Euro 7; Euro Matt 3: 10–12) |
| Same, rough absorbent surface | 7–9 | Tikkurila data sheets |
| High-opacity matt, often one coat | ≈ 8 (125 ml/m²) | Caparol Indeko-plus |
| Vinyl matt, manufacturer's maximum | up to 17 | Dulux Trade Vinyl Matt |
| Wall, ceiling & trim paints of one brand | ≈ 16 | Dulux Australia |
| US interior paint | 8.6–9.8 (350–400 sq ft per gallon) | Sherwin-Williams |
| Paint for woodchip wallpaper | 6.7–7.7 (130–150 ml/m²) | Dörken Lucite 462 Classic |
| Deep-penetrating primer | 5–10 (0.1–0.2 L/m²) | Ceresit CT 17 PROFI |
| Pigmented primer | 4.9–7.4 (200–300 sq ft per gallon); Dulux Primer ≈ 14 | Sherwin-Williams; Dulux Australia |
Worked example: a 4 × 3 m room
A 4 × 3 m bedroom with 2.7 m walls, one door, one window, two coats, paint covering 10 m² per litre, sold in 2.5 L cans.
| Step | Calculation | Result |
|---|---|---|
| Wall area | 2 × (4 + 3) × 2.7 | 37.8 m² |
| Openings | 1.6 + 1.5 | 3.1 m² |
| Area to paint | 37.8 − 3.1 | 34.7 m² |
| Paint for two coats | 34.7 × 2 ÷ 10 | 6.94 L |
| With the 10% reserve | 6.94 × 1.1 | 7.6 L |
| Cans | 7.634 ÷ 2.5 = 3.05, rounded up | 4 cans (10 L), about 3.1 L left over |
| Add the ceiling | 4 × 3 = 12 m², total 46.7 m²; 46.7 × 2 ÷ 10 = 9.34 L; × 1.1 | 10.3 L with reserve, 5 cans (12.5 L) |
| Primer for walls and ceiling | 46.7 ÷ 10 | 4.7 L, one 5 L container |
Notice how the reserve pushes the walls from 3 cans to 4. If your shop sells 9 L or 10 L tubs, one tub would cover the walls with litres to spare. Enter the can size you will actually buy.
Related articles
Part of Home Improvement Calculators