Calculators Hub
Free calculator

Spirit Dilution Calculator

How much water to add to bring a spirit down to the strength you want, worked out by mass so the shrinkage on mixing is included. Also corrects an alcoholmeter reading for temperature and works out the strength of two spirits blended together.

What to calculate
L
70 %
40 %
Target strength presets
Final mixture
Spirit Water added

Bar shows the original spirit and the added water proportional to their mass in the final mixture.

Before you dilute

  • Measure strength at about 20 °C. A 20 °C alcoholmeter reads high in warm liquid: 40.0 on the scale at 25 °C is really about 38.0%, at 15 °C about 42.0%. Use the Temperature correction tab if you can't wait for the liquid to cool.
  • Water and alcohol warm up when mixed, so leave the diluted spirit to cool back to room temperature before checking it.
  • Pour the spirit into the water, in one go, in the container you'll keep it in.
  • This tool covers dilution only. Cutting heads and tails during distillation is a separate subject and isn't covered here.
2.32 L
Water to add (by volume)
5.25 L
Final volume
2.32 kg
Water to add (by weight)

By the simple formula (ignores shrinkage): 2.25 L

Dilution table: water (mL) per 1 L of spirit

At 20 °C. For another volume, multiply by the number of litres. Values known as the Fertman table.

Dilution table: water (mL) per 1 L of spirit
Starting strength, % \ Target strength, % 90 85 80 75 70 65 60 55 50 45 40 35 30
95 64 133 209 295 391 501 629 779 957 1174 1443 1785 2239
90 65 138 218 310 414 535 677 847 1052 1306 1630 2061
85 68 144 231 329 443 578 738 932 1172 1478 1884
80 72 153 246 353 480 630 812 1039 1327 1709
75 76 163 264 382 523 694 906 1177 1535
70 81 175 285 417 577 774 1027 1360
65 88 190 311 460 644 878 1189
60 95 207 344 514 730 1017
55 103 229 384 583 845
50 114 255 436 674
45 127 290 505
40 144 335
35 167

How this is calculated

Strength (% ABV) is the volume of pure ethanol at 20 °C per 100 volumes of the mixture. Adding water doesn't change the amount of ethanol, so the final volume is exact: starting volume × starting strength ÷ target strength. The shortcut most people use goes wrong at the next step, when it assumes the water needed is the final volume minus the starting volume. Ethanol and water shrink when mixed, so you need a bit more water than that. This calculator gets the water from mass, which really does add up, using density tables for water–ethanol mixtures at 20 °C (OIML). Example: for 1 L of 95% spirit brought to 40%, the shortcut gives 1.375 L of water, while the dilution table gives 1.443 L. With the shortcut amount you end up above 40%. The temperature tab uses the OIML method behind official alcoholometric tables, and the blend tab uses the same mass balance for two spirits.

Worked example: 1 L at 96% to 40%

Shortcut: 1 × (96 ÷ 40 − 1) = 1.400 L of water, which gives about 41%. By mass: 1.471 L of water, ending with 2.400 L at 40%.

Why most dilution calculators get the water wrong

Common questions

How much water do I add to 1 litre of 70% spirit to get 40%?

About 774 mL, which gives 1.75 L at 40%. The table below has other common strengths, and the calculator handles any volume.

Why does the usual formula give less water than this calculator?

The formula V × (A ÷ B − 1) assumes the volume of the mix equals spirit plus water. Ethanol and water shrink when mixed, so the real water amount is a few percent higher: 1 L of 96% to 40% needs about 1.47 L, not 1.40 L. There's a longer breakdown in our blog article on this exact mistake.

Why does my diluted spirit test lower a day later?

Usually the first reading was taken while the mix was still warm. Mixing releases heat, and a warm liquid reads high on a 20 °C alcoholmeter, roughly 0.4% ABV per °C around 40%. Once it's back at 20 °C the reading drops to the true value.

How do I correct an alcoholmeter reading for temperature?

Use the Temperature correction tab: enter the reading and the liquid temperature to get the strength at 20 °C. It follows the international OIML method that official alcoholometric tables are built on. This only applies to alcoholmeters calibrated at 20 °C; US proof hydrometers at 60 °F work differently.

What strength should I dilute to before a second (spirit) run?

Home distilling guides commonly recommend about 20% (ranges of 18–25% appear). Use the 20% preset.

Can I raise the strength by adding a stronger spirit?

Yes. The Blend tab gives the strength and volume of the mix, contraction included. Water alone can only lower the strength.

Does this cover safe distilling?

No. It only handles dilution and blending of finished spirit. Separating heads and tails during distillation, where methanol and fusel oils matter, is a separate topic to learn properly.

Related articles

Part of Hobby & Craft Calculators

Related calculators

We use necessary cookies to run this site, and — only with your consent — analytics cookies to understand how it's used. Privacy Policy

Necessary

Required for login, saved calculations, and security. Always on.

Analytics

Helps us see which calculators are useful. Off by default.